SB-Tray for Euphonium – SB4T For Instruments With Bottom Cap Nipples

The new SB Tray is extraordinary light (10g) and nonmetallic, and it has small hooks on the end of the two protruding prongs that clip inside the bottom caps of valves one and three, giving a very secure and reliable grip. This model has the adjustable “hooks” to allow for the different dimensions of different brands of tubas.    The SB-Tray will catch any drips and grime of water and oil and muck that often spoil an instruments appearance and also ruin your clothes.

Please see the sizing guide and measure the gap to ensure you order the correct size for your instrument.  The key measurement is the distance between the outside edges of the valve holes, on valves one and three. Shown as “Width Measurement A” on the diagram.

As long as your instrument falls within the range specified, your SB-Tray should fit.

This is the model to fit on euphoniums with nipples on the bottom caps.

CLICK THE LINK BELOW TO THE ONE BEST SUITED TO YOUR INSTRUMENT

SB2C  FOR CORNET 52MM TO 59.5MM

SB2T FOR TRUMPET 52MM TO 59.5MM

SB2F FOR FLUGELHORN 52MM TO 59.5MM

SB2H FOR TENOR HORN 52MM TO 59.5MM

SB3T FOR BARITONE 54MM TO 63MM

SB4T FOR EUPHONIUM WITH FLAT BOTTOM CAPS  64MM TO 74MM

SB4T FOR EUPHONIUM WITH NIPPLES 64MM TO 74MM

SB6 FOR EEb BASS 72MM TO 78MM

SB7 FOR BBb BASS 76MM TO 82MM